top of page
Hand spreading open straps of Nymi Band to clean the band

Engineered for Stringent Cleaning Requirements

The Nymi Band is designed to withstand sanitization and disinfection protocols required in highly regulated environments, ensuring durability, compliance, and performance.

Graphical element incorporating Nymi Band render, teal sphere, and white bars

The Nymi Band supports 
your commitment to rigorous 
hygiene standards

Proper cleaning of the Nymi Band is essential for maintaining its functionality and ensuring user safety.

Below, we provide a comprehensive guide to help you clean and maintain your Nymi Band effectively.

Sanitizing Procedure

Preparing the Sanitizing Solution

Mild Soap Solution

Mix a few drops of mild, non-abrasive soap with warm water.
Ensure the solution is well-mixed and not overly soapy to prevent residue.

Application Materials

Use a soft cloth, lint-free wipe, or soft-bristled brush to apply the solution.
Avoid using abrasive materials that may damage the surface.

Sanitizing the Nymi Band

Step 1

Apply the Solution

Dampen the cloth, wipe, or brush with the soap solution.

Step 2

Wash Down Surfaces

Gently wash the entire surface of the Nymi Band with your applicator, including the strap, clasp, and sensor areas.

Holding a Nymi Band under running water in sink and brushing body with a toothbrush
Side of Nymi band straps and body being cleaned with disinfectant wipe

Step 3

Rinse (if necessary)

If soap residue remains, use a separate damp cloth or place under running water to wash away any excess soap.

Step 2

Dry Thoroughly

Use a clean, dry cloth to dry the Nymi Band completely before use or storage.

Disinfecting Procedure

Preparing the Disinfectant

Alcohol-Based Solution

Use a solution containing at least 70% isopropyl alcohol.
Alternatively, use an approved disinfectant specifically designed for electronic devices.

Alcohol-Based Solution

Use a microfiber cloth or disinfectant wipe that is compatible with electronics.
Disinfectant Application
Disinfecting the Nymi Band

Step 1

Apply Disinfectant

Lightly dampen the cloth or use a pre-moistened wipe with the disinfectant.

Step 2

Clean Thoroughly

Gently wipe all surfaces of the Nymi Band, paying special attention to high-touch areas such as the band, buckle, and sensor.

Step 3

Allow to Air Dry

Let the Nymi Band air dry completely before putting it back on or putting away in storage

Regular Cleaning Schedule

Establish a regular schedule for sanitizing and disinfecting the Nymi Band, especially in environments with strict hygiene requirements.

Use of Approved Cleaning Agents

Only use cleaning and disinfecting agents that are approved for use on the Nymi Band.

Maintaining Hygiene

Handle the Nymi Band with care and clean hands after sanitization or disinfection.

Holding steady a Nymi Band and cleaning face of band with disinfectant wipe

Storage After Cleaning

Dry Storage

Ensure the Nymi Band is completely dry before storing it to prevent moisture damage.

Safe Environment

Store the device in a clean, dry place, away from direct sunlight and extreme temperatures.

Commitment to Compliance and Safety

The Nymi Band is designed to meet the highest industry standards for hygiene and safety. By following these cleaning protocols, you can ensure the device's optimal performance and longevity, while also protecting user health and safety.

We’re here to help

Have additional questions on Nymi Band cleaning procedures? Explore these additional Support resources:

You can also reach out at info@nymi.com

Nymi_CleaningGuide image.webp
Read: The Nymi Band Cleaning Guide
Nymi_CleaningGuide image 2.webp
Read: The Nymi Band in Cleanrooms FAQ
bottom of page